How to Configure an SIP trunk between 2 anynode SBC.

                                 SIP Trunk between 2 SBC (Anynode).

If you have some legacy features like analog faxes, you can connect it to an SBC as a SIP client and configure the SIP trunk between SBCs.

To set up a SIP trunk between 2 Any nodes please follow:

In the first SBC (the Client System):

1. Add node

2.       PBX or Other Voice over IP System.

3.       Select Another any node

4.       Select the network Controller and enter a name.

5.       Specify the UDP/TCP Port (should be the same in the Host and the remote)

6.       This will be the client system so select SIP Registration Client

7.       Enter the Remote server IP address

8.       Set the Username and password

9.       Enter the Remote system IP address.

10.   If the system is behind a Firewall, select do not use peer list.

Then Next > Next > Next > finish

In the Other System (the server system) it will be the same except the following

1.       Sip interconnection (Node as SIP registrar)

2.       Enter the Username and the password for the SIP account.

Then Next > Next > Next > finish.